Vision X Xmitter Off Road Light Bar Installation - 1999 Hummer H1- Video
Today on our 1999 Hummer H1 we will be installing the 12" Long Vision X Xmitter Low-Pro Prime Xtreme Off Road Light Bar, part number XIL-LPX940. In conjunction with our install we will also be using the Vision X Mounting Brackets, part number XIL-B125 and some Deka Heat Shrink Butt Connectors, part number DW05744-5. The first step to getting our new Vision X lights installed is we need to get our brackets mounted first, so you need to remove the four bolts underneath to get it looking like this. Then we can take the top portion of our bracket, we'll take our included hardware, we're going to run our bolt down through like this, turn it over, put the washer on, and then we're going to get that lock nut started. Then we'll take the bracket, we're going to put it in the notched portion of the light like this, that way we can slide it to either side like this. I'm going to position mine right about there and then we can tighten that down. more
7/8/2015 1:06:06 PM
Vision X Xmitter LoPro Prime Off Road Light Bar Installation - 1999 Hummer H1- Video
Today, on our 1999 Hummer H1, we're going to install and take a look at the Vision X Xmitter off-road light bar. That's 195 watts, and 50 inches long, part number XIL-LPX3910. To mount our Vision X light bar, we're going to be using two set of the Vision X mounting brackets for the Vision X Xmitter lights and Evo prime light bars, part number XIL-B125. For most applications, these lights are a plug-and-play, if you get the Vision X wiring harness. That part number is P-HARNESSXIL, and that's for a single Vision X light. For this application today, we're actually going to be hard-wiring the lights into the vehicle since it already has factory toggle switches installed. The Vision X off-road light bar features a low-profile LED design that provides bright, focused light. more
6/11/2015 1:36:31 PM
Filter Videos
Filter Videos
